10 Stainless Steel Spring Bar Pins with Tool for Watch Band Buckle 8mm 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26mm Lug Attachment

10pcs Stainless Steel Spring Bar Pins with Tool for Any Watch, Band, Strap, Buckle or Adapters

Select Size and Thickness from the Drop Down Menus

Available Sizes:
-8mm
-9mm
-10mm
-11mm
-12mm
-13mm
-14mm
-15mm
-16mm
-17mm
-18mm
-19mm
-20mm
-21mm
-22mm
-23mm
-24mm
-25mm
-26mm

Available Thickness:
-1.5mm
-1.8mm

Product Description:
-10pcs High Quality Heavy Duty Stainless Steel Spring Bar Pins with Tool.
-The pins are compatible with any watch band, strap, buckle or Adapters that have the available - 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 23mm 24mm 25mm 26mm Lug Width Attachment.
-Simply measure your watch, buckle or adapter's lug width attachment to determine the needed pins or many manufacturers will have that information regarding band width sizes and lug sizes online.
-The Pin works by having an inside spring that pushes out the ends to make the pin hold onto the watch very well. The Double Flange design allows you to quickly and easily insert and remove the pins for repair or to make adjustments.

To Determine the Correct Pins:
-Measure the width between the watch lugs at the point where the watch band attaches.
-This would also be your watch band's attachment width.
-If the Pins are to be used for a buckle, simply measure the width of the buckle and that would give the correct size you would need.

See Photo Diagrams for Further Assistance if Needed

How to Install Pins:
1. Take the Pin Tool that is provided.
2. Insert the Pin into your desired band then insert one of the sides of the pin into the pin hole of the watch lug.
3. Place the Pin Tool Fork within the double flange end of the pin then press down on the pin and begin to position it into the other watch lug pin hole.
4. Maneuver the Pin around slightly until it has been inserted into the pin hole, the spring ends will expand and will securely attach.

To Remove the Pins:
1. You can use the Pin Tool Fork to grip the double flange end of the pin between the watch lug and your band.
2. Press down on the pin and band while slightly pulling the band and pin away.
3. If you watch has outer pin holes, you can use the other side of the pin tool to push out the pins and again press down and slightly pull away.

Watch Bands / Straps are not Included!

>>>If you have any difficulties or questions, you can contact us and we will assist you. Thank you!