4pcs Set Elegant Buckles for 12mm 14mm Watch Straps Bands Replacement Kit Clasp Silver Black Pink Rose Gold Color Finish -Pins Tool Included

You will receive 4pcs Set ( 1 Buckle, in the size of your choice – 12mm or 14mm with the appropriate 2 pins and 1 Tool for Easy Installation and Removal)

These Buckles are made from Stainless Steel and are precisely electroplated in Silver, Black, Gold, Rose Gold and Pink Rose Gold Color.

They are compatible with most traditional and smartwatches on the market.
The Buckles will give off a stylish look on your wrist and enhance your watch band.
Easy to Install and Remove with the provided Tool.

>>> Primary color Buckles - Optional:
Silver - (Has Polished Finish)
Point Silver - (Has Polished Finish)
Black - (Has Polished Finish)
Gold - (Has Polished Finish)
Rose Gold - (Has Polished Finish)
Pink Rose Gold - (Has Matte Finish)

>>>Buckles Width - Optional:
12mm - (tongue width 2mm)
14mm - (tongue width 2mm)

*(Attention - Some Watch Bands are the same width from the Watch to the Buckle, but some bands narrow and the width decreases in size at the buckle, so it is very important to get the correct size at the spot where the buckle attaches to the band. Usually they are even numbered - such as 12, 14, 16mm etc, but even if they are odd numbered, you can always use this buckle because a slight difference of 0.5mm on each size is not a visible add +1mm.) For example: if you have a band that is 13mm, choose 1mm larger -> the 14mm buckle, this way the width of the band can easily go inside of the width of the buckle.

>>>How to Install:
First Remove the old Buckle from your watch band.
Make sure that you have chosen the right size buckle.
Insert the pin in the band which has to go through the tongue of the buckle and then come out the other side of the band.
Make sure that the new buckle size will match the one that you are trying to replace. (Tips : Make sure the width of the tongue that stays on the middle of the band is the same or very similar size as well, so the installation will be smooth and nice.)

Next Insert the Pin into one of the Buckle Side Holes, but make sure that the tongue of the buckle is on the top position, because if you lock the pin in, you want the tongue in the correct position, not upside down or under.

Since the Pin is with a spring , now you have to connect the other side of the pin into the other buckle hole. You can use the Fork side of the tool to compress the pin and guide it towards the hole so the pin will lock into position.

>>>How to Remove the Buckle:
You can use the Pin Tool Fork to grip the double flange end of the pin between the watch lug and your band. Then Press Down on the pin and band while slightly pulling the band and pin away.

These Buckles also can be used for creative projects such as purses, shoes, bags, belts and many others as well.

>>>If you have any difficulties or questions, you can contact us and we will assist you. Thank you!